Look carefully at the grooves in the spot where it skips. I saw an album once that had a pressing defect where the grooves were “swiggly” instead of circular.
MoFi UltraDeck / StudioDeck Owners and those interested
- Thread starter AnthonyI
- Start date
dansomeone
Well-Known Member
Is your new album the Telarc 1812 Overture?
I'll look. It may be something like this. It wobbles left to right before it jumps... more than normal
Pressing defect. The thing that irked me on the album I found was it was a nearly mint Quadrophonic Jethro Tull Aqualung. I’ve never seen one before or since.
Welcome! Nice system!
kvetcha
Well-Known Member
Welcome! Looks like we're in the same part of the world.
pbass4life
New Member
Hello everyone! I'm new here. This is my first post. I just finished reading this whole thread and I'm now a bit worried because I ordered a Studiodeck about three weeks ago, it should be here this week. But after reading all the issues this deck has had I'm concerned to say the least. I'm in Ontario Canada and with tax I'm into this deck for a tad under $2,400.00 CAD. Should I expect these kinds of issues to be normal for that kind of financial layout? At this point I'm hoping that MoFi has looked into and addressed all the issues. My choice came down to the Studiodeck and the Technics SL-1200GR..... I chose to go with the Studiodeck. Color me worried. 
Hi and welcome!
The number of issues have actually been quite low. The vast majority of owners here are very happy. I wouldn’t worry.
$2400 CAD? What’s a GR cost there?
The number of issues have actually been quite low. The vast majority of owners here are very happy. I wouldn’t worry.
$2400 CAD? What’s a GR cost there?
pbass4life
New Member
dansomeone
Well-Known Member
I have a studiodeck. Love it, zero issues.Hello everyone! I'm new here. This is my first post. I just finished reading this whole thread and I'm now a bit worried because I ordered a Studiodeck about three weeks ago, it should be here this week. But after reading all the issues this deck has had I'm concerned to say the least. I'm in Ontario Canada and with tax I'm into this deck for a tad under $2,400.00 CAD. Should I expect these kinds of issues to be normal for that kind of financial layout? At this point I'm hoping that MoFi has looked into and addressed all the issues. My choice came down to the Studiodeck and the Technics SL-1200GR..... I chose to go with the Studiodeck. Color me worried.
pbass4life
New Member
Is the motor noisy on your Studiodeck?
dansomeone
Well-Known Member
Not at all.
Sebastian
It’s Wool…
Welcome @pbass4life!
I too had concerns while reading this thread but everyone in here seems to trust @HiFi Guy so if anything happens to your table, fly down to his place and give him a dead arm.
I too had concerns while reading this thread but everyone in here seems to trust @HiFi Guy so if anything happens to your table, fly down to his place and give him a dead arm.
GStephenH
Active Member
So, if I've greased the bearing and it has massive air trapped not letting the platter settle after a few hours, do I just need to try and remove grease with a Q-tip or something to allow for air escape?
You’ve likely used too much grease. Q Tips work. I did the same thing the first time I cleaned and relubed the bearing and shaft.
Ontario is likely safer than Florida right now.
Sebastian
It’s Wool…
You guys will have to work that out. Maybe 2022?Ontario is likely safer than Florida right now.
Pergo
Active Member
Love my Studiodeck! Have had it for just over a year now and haven't had a single issue. Enjoy!Hello everyone! I'm new here. This is my first post. I just finished reading this whole thread and I'm now a bit worried because I ordered a Studiodeck about three weeks ago, it should be here this week. But after reading all the issues this deck has had I'm concerned to say the least. I'm in Ontario Canada and with tax I'm into this deck for a tad under $2,400.00 CAD. Should I expect these kinds of issues to be normal for that kind of financial layout? At this point I'm hoping that MoFi has looked into and addressed all the issues. My choice came down to the Studiodeck and the Technics SL-1200GR..... I chose to go with the Studiodeck. Color me worried.