Michell Clamp - does it actually help flattening warped records?
- Thread starter Fixxman32
- Start date
MikeH
Well-Known Member
I think @JohnnyCashFan has/had this clamp? I’d imagine it depends on the kind of warp. I couldn’t see a clamp fixing a bad edge warp
JohnnyCashFan
Well-Known Member
It does up to a certain extent.
Keep in mind if you order there is a different model for Rega and tables with a shorter spindle.
If you have a really bad warp you can also try and find someone with a Vinyl Flat device. I do not see any euro members listed here but perhaps you could post to see.
www.vinylflat.com
www.needlesandgrooves.com
Keep in mind if you order there is a different model for Rega and tables with a shorter spindle.
If you have a really bad warp you can also try and find someone with a Vinyl Flat device. I do not see any euro members listed here but perhaps you could post to see.
Vinyl Flat | Fix Warped Vinyl Records with the Best Record Flattener
Fix warped vinyl records safely with the Vinyl Flat Record Flattener. Our proven vinyl flattener restores records with even heat and pressure. Shop now!
www.vinylflat.com
Gotta warp, these members can help. [Vinyl Flat]
UPDATED: 2/7/2021 Myself and a few other members have stepped up and are willing to help members with their warped album. Below is the list of members willing and happy to help. If you would like to be added to the list, please PM me. List by forum name and location: @AnthonyI - IL (US)...
www.needlesandgrooves.com
MikeH
Well-Known Member
those are the kind of warps I would buy it for. It should hopefully work well!The records in question have an upwards bow from the center. Not very serious, but enough to cause the arm to ride up and down..
I bought one now, so ill inform you of my findings
JohnnyCashFan
Well-Known Member
The records in question have an upwards bow from the center. Not very serious, but enough to cause the arm to ride up and down..
I bought one now, so ill inform you of my findings
affirmative, in fact this video shows exactly that
Tillman
Well-Known Member
I have and use the Michell Clamp, and as @JohnnyCashFan noted it will help to extent but it won't work miracles... that said slight bowls are exactly what it will help remedy best, it will not help with edge warps.The records in question have an upwards bow from the center. Not very serious, but enough to cause the arm to ride up and down..
I bought one now, so ill inform you of my findings
it's also supposed to help it other areas as well, such as tightening up the bass or whatever, but I won't speak on any of that as my ear isn't that finely tuned
Tillman
Well-Known Member
I don't use a mat, my turntable has an acrylic platter and I just place the record directly on that and clamp it.Worked at thinner records actuallyBut, should i use it with a mat? Or is it safe to use with the delrin platter on my Ultradeck?
it does come with a small, felt washer that goes between the record and the platter (or mat if you're using one, I'd imagine), but on some of the heavier/thicker pressings I have I can't use the washer because it seems it will create too much space to effectively tighten the clamp to my turntable's spindle
zdkaiser
Well-Known Member
Turntable Lab sells the something similar as the Michell for $20. Don't own it, but plan to buy it at some point. Also, it is very low profile, so it'll fit under the dustcover when playing, if that's how you roll.
Edit: nevermind, looks to be OOS.
Turntable Lab: Record Clamp Stabilizer
Buy Turntable Lab: Record Clamp Stabilizer at TurntableLab.com, a Better Music Store Experience since 1999.
www.turntablelab.com
JohnnyCashFan
Well-Known Member
The Michell is also hard to find in North America currently as they lost there old NA distribution (Artech) recently.
JohnnyCashFan
Well-Known Member
Try it without the mat first. My old man used a similiar VPI Delrin Clamp on a bare VPI Delrin platter for 10 years and it worked like a peach. Mats will play with your VTA and sometimes (depending on material ie cork) add static.
And I recommend using the washer on the Michell. That is how it is designed. As the second video I posted noted it needs a little time to break in/shape to form.
Last edited:
Tillman
Well-Known Member
I do too, and this may not be everyone's experience depending on their spindle, but there are a small amount of records I have that I simply cannot use the clamp with the washer, so the choice is clamp with no washer or no clamp at all.
I've also been using the same washer for probably around 5 years, so it's definitely been broken in.