Yeah, resonant frequency is around 9hz depending on the mass of your fasteners. Right in the sweet spot.Hi, ive got a MoFi UD with its tonearm at 25.14gr ( from MoFi )
and ive paired that one with a Phasemation PP-200
Which weighs 10,5gr and has a dyne of:
8.5μ/mN [8.5x10-6cm/dyne]
Will the work fine together?
However, its not specified wheter 10 or 100hz .. and its japanese so presume 100hz?Yeah, resonant frequency is around 9hz depending on the mass of your fasteners. Right in the sweet spot.
Calculate Tonearm - Cartridge Capability
mh-audio.nl
Ah, I did not know it was a Japanese cart. Those are indeed normally specified at 100hz, which isn't particularly helpful for our purposes.However, its not specified wheter 10 or 100hz .. and its japanese so presume 100hz?
Still within ish.Ah, I did not know it was a Japanese cart. Those are indeed normally specified at 100hz, which isn't particularly helpful for our purposes.
Apparently you can loosely estimate compliance at 10hz by multiplying the 100hz compliance by about 2x.
I based my cartridge purchase on weight-range of the antiskate.Ah, I did not know it was a Japanese cart. Those are indeed normally specified at 100hz, which isn't particularly helpful for our purposes.
Apparently you can loosely estimate compliance at 10hz by multiplying the 100hz compliance by about 2x.