Recent content by Fixxman32

  1. F

    MoFi UltraDeck / StudioDeck Owners and those interested

    I ran it on notch #3 for a while, and now 4. Cant tell the difference quite yet. But on notch 3, when i lift the arm it sorta pulls outwards. On notch 4 it does not pull the arm outwards.
  2. F

    MoFi UltraDeck / StudioDeck Owners and those interested

    Phasemation PP-200, 10,5gr
  3. F

    MoFi UltraDeck / StudioDeck Owners and those interested

    Wow. Confusing 🤯 ill stick to that information then 👍
  4. F

    MoFi UltraDeck / StudioDeck Owners and those interested

    Sure? I asked MoFi and they said its notch #5 They count from the base of the pin.. And from their website. " Q: Is “Notch 1” on the Anti-Skate Pin at the tip or the base of the anti-skate pin? A: Notch 1 is nearest the base of the pin. " Now im really confused..
  5. F

    MoFi UltraDeck / StudioDeck Owners and those interested

    So this would be notch #4? https://www.dropbox.com/s/p5kt9o0v8096r2z/IMG_20230524_221630.jpg?dl=0 From the MoFi webpage: Q: Is “Notch 1” on the Anti-Skate Pin at the tip or the base of the anti-skate pin? A: Notch 1 is nearest the base of the pin.
  6. F

    Vinyl Storage Recommendation

    Im getting my Kallax units set up next week, are there any issues with leaning records if you fill the shelf up? I bought some book-ends to support the records in case they start leaning.
  7. F

    Tonearm resonance / compliance question

    If the data i found is correct, the included MoFi MasterTracker is at 17cu, whilst my Phasemation PP-200 is around 14 I based my cartridge purchase on weight-range of the antiskate. MoFi specs are: Notch 1: 4g – 6g cartridges Notch 2: 6g – 8g cartridges Notch 3: 8g – 10g cartridges Notch 4: 10g...
  8. F

    Tonearm resonance / compliance question

    Still within ish. :)
  9. F

    Tonearm resonance / compliance question

    However, its not specified wheter 10 or 100hz .. and its japanese so presume 100hz?
  10. F

    Tonearm resonance / compliance question

    Hi, ive got a MoFi UD with its tonearm at 25.14gr ( from MoFi ) and ive paired that one with a Phasemation PP-200 Which weighs 10,5gr and has a dyne of: 8.5μ/mN [8.5x10-6cm/dyne] Will the work fine together?
  11. F

    Gotta warp, these members can help. [Vinyl Flat]

    Question about this record: I have listened to it, and it sounds ok. Just wondering wheter the suspension will wear out faster if i keep playing it? Or is the cantilever suspension doing what it was designed to do, keeping the cantilever in the grooves...
  12. F

    Tonearm and cartridge tremor

    Not anything audible. No tremors after track 1. But it cant be good for the suspension in the cart? Maybe some sort of resonance trigger in the record?
  13. F

    Tonearm and cartridge tremor

    https://www.dropbox.com/s/l6tah8w9shydenf/vid_20221018_191349.mp4?dl=0 What would cause this behaviour? Its just this one record that causes it.
  14. F

    Tonearm and cart judder, whats the cause?

    Hi, i noticed on two records, but not the entire record, that the tonearm and cart judders. Whats the cause? Bad pressing? And, is it harmful for the cart's suspension in the length?
  15. F

    Cartridge loading question

    Hi, i have a Lyra Delos that now has passed its "burn-in" time, up to now its been abit bass-less, so ive ran it at 75ohms. But all of the sudden it opened up and damn, everything became better. Too my taste tho, abit too bass-heavy so ive been fiddling with impedance-loading. Currently at...
Back
Top