Source selector switch

[Angsty]

I’ve had two older amps recapped by Peter Williams at Quirk Audio in the past two years. Peter does great work, but now I’m faced with the decision on which amp to keep in my main setup. To help with the comparison over the summer, I’d like to get an amp/source selector switch. Do any of you have a recommended switch?

I’ve seen these two on Amazon, but I thought I’d ask about prior experiences before making a purchase.

https://a.co/bsTJ8Ao

Amazon.com

 

[JohnnyCashFan]

TBH, I would just switch them manually I/O every week or so and take good written an memory notes. You do not want anything in circuit skewing your decision even if it's passive.

 

[Angsty]

Turns out that both switches have loading resistors in them for tube amplifiers, but that can impact the high frequency roll-off. I'll take the advice, @JohnnyCashFan .

 

[kvetcha]

Turns out that both switches have loading resistors in them for tube amplifiers, but that can impact the high frequency roll-off. I'll take the advice, @JohnnyCashFan .

I use one for my setup and haven’t had any complaints regarding frequency response.

 

[Mr Moustache]

I use a shiit sys to switch inputs between record player and digital. It works, and no electronic in there.

 

[Angsty]

I use one for my setup and haven’t had any complaints regarding frequency response.

Which switch do you use?

 

[Angsty]

I use a shiit sys to switch inputs between record player and digital. It works, and no electronic in there.

I was looking to switch a pair of speakers between two amps with a single set of cables to each amp.

 

[kvetcha]

Which switch do you use?

The exact model I have isn’t one of the two you’re using but it’s internally very similar.

2x2 Speaker Selector Switch... Amazon product ASIN B00UZ86M0E